Click on this link to see CAD pricingDetails
Ignition Start Switch for Carter Brothers Interceptor GTR 250 / 300.
This is a 3-wire ignition switch adapted to work with the 5-wire ignition switch connector on a GTR 250 / 300. It includes a relay to make it behave the same way as the 5-wire ignition switch.
It is plug-and-play. As shown in the picture, you will need to connect the yellow wire to the ground/frame of the machine. To test if it works properly, put the ignition switch in the accessories position, and you will hear the relay click/engage. If it does, you have a good connection on the ground. If not, redo the ground and properly clean the connection on your machine.
Here is a list of parts you might need in the future if you need replacement parts.
Ignition switch 3 wires
Relay
Replacement part for:
Carter Brothers Interceptor GTR 250 part number: 609-6022-AFT
Carter Brothers Interceptor GTR 300 part number: 609-6022-AFT
This is a 3-wire ignition switch adapted to work with the 5-wire ignition switch connector on a GTR 250 / 300. It includes a relay to make it behave the same way as the 5-wire ignition switch.
It is plug-and-play. As shown in the picture, you will need to connect the yellow wire to the ground/frame of the machine. To test if it works properly, put the ignition switch in the accessories position, and you will hear the relay click/engage. If it does, you have a good connection on the ground. If not, redo the ground and properly clean the connection on your machine.
Here is a list of parts you might need in the future if you need replacement parts.
Ignition switch 3 wires
Relay
Replacement part for:
Carter Brothers Interceptor GTR 250 part number: 609-6022-AFT
Carter Brothers Interceptor GTR 300 part number: 609-6022-AFT
Facebook
Instagram
YouTube